Representing a generational leap in Nightjar Acoustics performance, Singularity is the cumulation of years of development on single dynamic driver earphones. Nightjar's 10mm Timbre+ dynamic driver let's listeners experience massive bass along with natural midrange and treble timbre. These two characteristics that usually oppose each other are balanced to perfection with Singularity and projected onto Singularity's expansive and dimensional soundscape. Embrace the entrancing pull of Singularity as it takes dynamic driver earphones to a whole new level of excellence. [See Product Desc. For More] Nightjar's proprietary method of driver design for Timbre+ allows Singularity to achieve a leap in performance without the usual metallic, lean or bright tuning usually required to achieve a high level of technical capability in a single DD. Singularity achieves this through a meticulously designed diaphragm, drive assembly and internal chamber. Nightjar's bespoke solution optimises airflow while balancing the moving mass and magnetic flux of the driver to achieve a technical yet natural presentation, with robust bass performance and properly extended highs. Said-acoustic know-how has been dubbed CAthedral – a custom chambering solution meticulously crafted to deliver a vast and natural soundstage that feels remarkably authentic, boasting impressive intricacy and layering. Unlike most IEMs, Singularity ensures an exceptional emphasis on stage depth, taking your listening experience to the next level. Check out Nightjar's other releases including their cables here, or view our other IEMs here.

A little red earphone from a little red dot called Singapore. Designed to fit as many ears as possible with its small ergonomic shell but create a massive sound, the Meteor is a phenomenon to be reckoned with.  Driver Crossover - Custom Tuned True 3-Way Crossover with PHAT Technology Frequency Response - 12Hz - 21kHz, ± 3 dB Sensitivity - 111dB/Vrms @ 1 kHz Impedance - 9.7 Ohms @ 1 kHz Socket - Spring Loaded 0.78mm 2-Pin Cable - 26 AWG OCC Copper Cable Impedance - 0.20 Ohms (2.5mm), 0.25 Ohms (3.5mm), 0.28 Ohms (4.4mm) @ 1kHz

Duality introduces a new caliber in dynamic driver performance with its custom-developed dual dynamic driver setup, precisely tuned with a true two-way crossover. With two unique tunings selectable via a switch, Duality offers a unique blend of indulgent fun and refined precision. Whether you've been looking for a monstrous bass experience unlike anything else, or for natural dynamic driver timbre with next level technical performance, Duality takes both specialties of dynamic driver performance to their logical conclusions. Impedance adapters are an optional add-on for Duality which increases sub-bass further at the cost of some sensitivity. These impedance adapters are designed specifically for Duality and interact with the Duality's intentionally shaped impedance curve in a way that only adds sub-bass, while keeping the rest of the frequency response unchanged. The adapters also change the character of the bass from a slightly more rounded, suited for general listening, to more intense and focused, which gives you full bass intensity but might be a bit overwhelming for some. This change is facilitated by the shifting of the peak of the bass shelf further into the sub 20Hz territory, increasing perceived bass impact and texture.  Do note that with the adapter attached, the driving requirements increase by a considerable amount. Please reach out to us if you are unsure if your set-up has sufficient power.

***Made to order, ~1 week turnaround time Conductor: 7N OCC Copper for signal, Copper & Silver-Plated Copper hybrid mix for ground Geometry: Multi-Gauge Shielded Litz Sleeve: Ultrasoft PVC True Gauge: 24.6 AWG Resistance (Including Connectors): 0.12Ω Solder: Custom Silver Blend Default length: 1.2m (Inquire for other lengths) Inquire for other connectors/terminations

***Made to order, ~1 week turnaround time Conductor: 7N OCC Copper Geometry: Shielded Litz Sleeve: Ultrasoft PVC True Gauge: 25.6 AWG (2-wire), 22.6 AWG (4-wire) Resistance (Including Connectors): 0.17Ω (2-wire), 0.08Ω (4-wire) Solder: Custom Silver Blend Default length: 1.2m (Inquire for other lengths) Inquire for other connectors/terminations

***Made to order, ~1 week turnaround time Conductor: 7N OCC Copper for signal, Copper & Pure Silver mix for ground Geometry: Multi-Gauge Shielded Litz Sleeve: Ultrasoft PVC True Gauge: 22.0 AWG Resistance (Including Connectors): 0.07Ω Solder: Custom Silver Blend Default length: 1.2m (Inquire for other lengths) Inquire for other connectors/terminations

***Made to order, ~1 week turnaround time Conductor: 7N OCC Copper Geometry: Multi-Gauge Shielded Litz Sleeve: Ultrasoft PVC True Gauge: 26.1 AWG (2-wire), 23.1 AWG (4-wire) Resistance (Including Connectors): 0.20Ω (2-wire), 0.10Ω (4-wire) Solder: Custom Silver Blend Default length: 1.2m (Inquire for other lengths) Inquire for other connectors/terminations

***Made to order, ~1 week turnaround time Conductor: 7N OCC Copper for signal, Copper & Pure Silver mix for ground Geometry: Multi-Gauge Shielded Litz Sleeve: Ultrasoft PVC True Gauge: 19.0 AWG Resistance (Including Connectors): 0.04Ω Solder: Custom Silver Blend Default length: 1.2m (Inquire for other lengths) Inquire for other connectors/terminations

***Made to order, ~1 week turnaround time Geometry: Multi-Gauge Shielded Litz Sleeve: Ultrasoft PVC True Gauge: 24.3 AWG Resistance (Including Connectors): 0.15Ω Solder: Custom Silver Blend Default length: 1.2m (Inquire for other lengths) Inquire for other connectors/terminations